Non-Woven Filter Fabric
Since 1979, Filtration Systems Products has been the leader in the field of non-woven filter converting. Our knowledgeable sales team can help you analyze your filtration requirements and provide solutions that balance performance and cost. With a range of media options, we’ll help you find the most suitable material for your project.
Discover our superior custom filtration products and cost-saving solutions tailored to your needs.
Our Non-Woven Filter Fabric & Roll Media Material
Our non-woven media is applied for coolant filtration on gravity, vacuum, and pressure filter units. The available widths range from 1 inch to 131 inches. Additionally, we offer FDA-approved filter materials suitable for use in the hot oil frying industry. Our team can also provide custom widths, lengths, and core dimensions.
Polypropylene
Spunbond Polypropylene is made from continuously extruded resin and point bonded for additional strength. It is an excellent low cost choice for applications generating large particulate such as machining. It is naturally hydrophobic and while very strong, it is susceptible to blinding in environments with high tramp oil.
Its characteristics include:
- Spunbond, Pointbond
- Continuous Fiber
- Less Uniform Fiber Structure
- Surface Filtration
- High tensile strength, especially at higher basis weights
- Low cost compared to other synthetic fibers
Oleophilic
Polypropylene is a ubiquitous product commonly used in markets ranging from medical, to hygiene to furniture and bedding production. For this reason it is considered a commodity product.
Our polypropylene products include the following:
Single layer homopolymer
FIBER: Polypropylene
CONSTRUCTION: Spunbond
BONDING: Pointbond
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SPB10 | 0.5 | 7 | 22 | 11 | 7 | 703 |
SPB16 | 0.8 | 9 | 31 | 18 | 11 | 455 |
SPB20 | 1.0 | 11 | 40 | 23 | 17 | 353 |
SPB25 | 1.25 | 13 | 43 | 30 | 22 | 253 |
SPB30 | 1.5 | 15 | 54 | 34 | 24 | 210 |
SPB40 | 2.0 | 17 | 62 | 48 | 37 | 133 |
SPB50 | 2.5 | 20 | 73 | 62 | 48 | 128 |
SPB60 | 3.0 | 25 | 76 | 60 | 52 | 145 |
Non-woven constructed of multiple layers of light weight polypropylene.
- Polypropylene
- Spunbond
- Binder N/A
- Good Chemical Compatibility
- Low Cost
- High Strength
- Good Efficiency
| FSP# | WEIGHT (O.S.Y.) | THICK (MILS) | GRAB STRENGTH | PERM (CFM) | |
| MACHINE DIRECT | CROSS DIRECT | ||||
| SPB30LAM | 1.50 | 14 | 44 | 35 | 258 |
| SPB40LAM | 2.00 | 19 | 70 | 50 | 219 |
| SPB50LAM | 2.50 | 21 | >90 | 75 | 172 |
| SPB60LAM | 3.00 | 26 | >100 | 85 | 150 |
Polypropylene made with a percentage of smaller denier fiber. The resulting product has high efficiency characteristics.
FIBER: Polypropylene
CONSTRUCTION: Spunbond
BONDING: Pointbond
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SHP30SMS | 1.5 | 12 | 36 | 19 | 21 | 80-90 |
SHP45SMS | 2.25 | 19 | 47 | 27 | 28 | 51 |
SHP50SMS | 2.5 | 20 | 65 | 43 | 42 | 35 |
Polypropylene that is chemically treated to change its natural characteristic from hydrophobic to hydrophilic.
FIBER: Polypropylene
CONSTRUCTION: Spunbond
BONDING: Pointbond
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SPB11WW | .60 | 7mils | 17 | 10 | 6.7 | 696 |
SPB15WW | .80 | 8mils | 19 | 15 | 13.9 | 546 |
Polyester
Polyester is a synthetic polymer with excellent mechanical strength and better dimensional stability than other materials. Polyester was one of the earliest products commercially available for industrial filtration applications. It has excellent qualities for coolant filtration, specifically high flow characteristics. Unlike polypropylene, it is well suited for high tramp oil environments.
Characteristics of polyester:
- Spunbond, Pointbond
- Continuous Fiber
- Less Uniform Fiber Structure
- Surface Filtration
- Good Strength
- Good Chemical Compatibility
We offer the following polyester products:
FIBER: Polyester
CONSTRUCTION: Spunbond
BONDING: Pointbond
| FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
| Machine Direct | Cross Direct | |||||
| SMP10PB | .50 | 3 | 15 | 15 | 6 | 1083 |
| SMP12PB | .59 | 6 | 17 | 50 | 10 | 950 |
| SMP20PB | 1.0 | 8 | 38 | 60 | 20 | 608 |
| SMP25PB | 1.25 | 11 | 80 | 44 | 34 | 400 |
| SMP30PB | 1.5 | 12 | 97 | 62 | 28 | 410 |
| SMP40PB | 2.0 | 12 | 100 | 75 | 62 | 370 |
High Strength. Chemical Resistance. High Flow Rates.
FIBER: Polyester
CONSTRUCTION: Spunbond/Flatbond
BONDING: N/A
| FSP# | WEIGHT (O.S.Y.) | THICK (MILS) | GRAB STRENGTH | MULLEN BURST | PERM (CFM) | |
| MACHINE DIRECT | CROSS DIRECT | |||||
| S-MP11FB | .59 | 7 | 14 | 6 | 55 | 1141 |
| S-MP12FB | .60 | 7 | 15 | 7 | 52 | 996 |
| S-MP15FB | .75 | 7 | 17 | 11 | 62 | 937 |
| S-MP20FB | 1.0 | 8 | 24 | 16 | 77 | 736 |
| S-MP25FB | 1.25 | 10 | 32 | 20 | 76 | 623 |
| S-MP30FB | 1.5 | 11 | 36 | 25 | 104 | 553 |
| S-MP35FB | 1.75 | 11 | 41 | 37 | 115 | 475 |
| S-MP40FB | 2.0 | 13 | 53 | 38 | 129 | 416 |
| S-MP50FB | 2.5 | 13 | 59 | 44 | 131 | 278 |
| S-MP60FB | 3.0 | 14 | 64 | 49 | 140 | 276 |
| S-MP80FB | 4.0 | 19 | 68 | 60 | 80 | 191 |
FIBER: Polyester
CONSTRUCTION: Spunbond
BONDING: Flatbond
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SLB10 | 0.50 | 5 | 7 | 9.0 | 7.0 | 1170 |
SLB12 | 0.60 | 8 | 11 | 10.0 | 8.0 | 1067 |
SLB14 | 0.75 | 9 | 12 | 14.0 | 11.0 | 1021 |
SLB16 | 0.75 | 8 | 15 | 19.0 | 14.0 | 1064 |
SLB20 | 1.00 | 10 | 17 | 19.0 | 16.0 | 893 |
SLB28 | 1.35 | 12 | 32 | 36.0 | 27.0 | 681 |
SLB28F | 1.35 | 12 | 28 | 32 | 30 | 521 |
SLB44 | 2.10 | 12 | 52 | 61.0 | 47.0 | 385 |
SLB60 | 2.95 | 18 | 84 | 102.0 | 78.0 | 287 |
SLB80 | 4.00 | 20 | 100 | 125.0 | 100.0 | 190 |
SLB120 | 6.00 | 31 | 82 | 136.0 | 100.0 | 176 |
SLB40LAM | 2.00 | 8.6 | 51 | 61 | 44 | 215 |
SLB60LAM | 3.00 | 12 | 75 | 105 | 75 | 145 |
FIBER: Polyester
LAMINATE 5PLY
FSP# | WEIGHT (O.S.Y.) | THICK (MILS) | GRAB STRENGTH | MULLEN BURST | PERM (CFM) | |
MACHINE DIRECT | CROSS DIRECT | |||||
S-MP30LAM | 1.5 | 12 | 363 | |||
S-MP50LAM | 2.50 | 20 | 68 | 50 | 80 | 272 |
Manniweb®
Wet Laid Pet/Cellulose is a combination of polyester and cellulose fibers. It has a very uniform fiber structure that allows for small particulate removal even at lower weights, making it a good choice for grinding and polishing and honing applications.
Characteristics of Manniweb:
- Uniform Fiber Structure
- High Particulate Removal Even with Lighter Weights
- Good Tensile Strength at Heavier Weights
- High Chemical Compatibility
FIBER: Polyester/Cellulose
CONSTRUCTION: Wetform
BONDING: Chemical Binder
| FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
| Machine Direct | Cross Direct | |||||
| SMW20 | 1.0 | 9 | 36 | 43 | 28 | 532 |
| SMW30 | 1.5 | 14 | 55 | 47 | 30 | 419 |
| SMW36 | 1.8 | 16 | 63 | 60 | 40 | 351 |
| SMW50 | 2.5 | 20 | 72 | 77 | 57 | 164 |
| SMW70 | 3.5 | 26 | 108 | 115 | 95 | 124 |
Kiara
PE-Polyethylene BI-Component is a combination of two polymers: polypropylene and polyethylene. It is manufactured using a thermal bonding process that produces a high strength, uniform fiber structure product ideal for grinding and general machining applications.
Characteristics of Kiara:
- High Tensile Strength
- Stretchability
- Excellent Chemical and Heat Resistance
- Low Moisture Absorption
FIBER: Polyester/Polyethylene
CONSTRUCTION: Carded
BONDING: Thermal
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SAK16 | 0.8 | 9 | 20 | 16 | 8 | 765 |
SAK20 | 1.0 | 10 | 25 | 23 | 11 | 666 |
SAK30 | 1.5 | 12 | 35 | 38 | 20 | 464 |
SAK34 | 1.7 | 13 | 40 | 42 | 24 | 411 |
SAK40 | 2.0 | 16 | 50 | 50 | 28 | 370 |
SAK60 | 3.0 | 20 | 70 | 60 | 35 | 213 |
SAK80 | 4.0 | 27 | 90 | 85 | 40 | 133 |
Rayon
Rayon is an airlaid carded product with unidirectional fiber structure. It has a uniform fiber structure and good flow characteristics. Due to its strength limitations, it is often limited for use on gravity beds. Our food grade rayon can sustain high temperatures required for frying applications and is FDA approved.
Characteristics of rayon include:
- Absorbency
- High Tensile Strength
- Excellent Elasticity
- Low Moisture Absorption
- Chemical Resistance
Rayon can filter organic solvents, oils, and coolants. It’s also suitable for wastewater treatment, industrial cooling systems, and chemical processes.
Our rayon products include the following:
FIBER: Rayon
CONSTRUCTION: Dry Carded
BONDING: Chemical Binder
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SWEB#1 | 1.35 | 14 | 25 | 50 | 14.5 | 505 |
SWEB#2 | 1.75 | 18 | 32 | 53 | 20 | 400 |
SWEB#4 | 2.1 | 15 | 30 | 80 | 25 | 332 |
SWEB#5 | 1.5 | 15 | 35 | 55 | 23 | 465 |
SHTC | 0.8 | 9 | 25 | 15 | 1.75 | 678 |
FIBER: Rayon
CONSTRUCTION: Dry Laid
BONDING: Chemical Binder
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SF3 | 0.6 | 7 | 821 | |||
SF4 | 0.7 | 8 | 8 | 12 | 5 | 738 |
SF5 | 0.8 | 8 | 11 | 14 | 6 | 680 |
SF6 | 1.0 | 9 | 15 | 18 | 8 | 585 |
SF7 | 1.25 | 10 | 15 | 21.5 | 10 | 472 |
SF32 | 1.6 | 11 | 24 | 25 | 11 | 428 |
SF38 | 1.9 | 12 | 29 | 29 | 13 | 290 |
SF52 | 2.6 | 16 | 39 | 49 | 23 | 223 |
Encore
PET Bicomponent fibers in either needled or airweave construction create products that are forgiving in both high flow and high tramp oil environments. Can be used in a variety of applications that have wide particulate generation ranges.
Characteristics of Encore include:
- Needled or Airweave
- Good Strength at Heavier Weights
- Good Flow Characteristics
- Depth Filtration – High Dirt Holding Capacity
Our products include:
Construction Proprietary. Good Efficiency. Good Strength.
FSP# | WEIGHT (O.S.Y.) | THICK (MILS) | GRAB STRENGTH | PERM (CFM) | |
MACHINE DIRECT | CROSS DIRECT | ||||
SMU40 | 2.0 | 33 | 34 | 15 | 664 |
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
S-MU60PET | 3.0 | 35 | 88 | 84 | 25 | 306 |
Good Strength. Good Efficiency.
FIBER: Polyester
CONSTRUCTION: Proprietary
Airweave
FSP# | WEIGHT (O.S.Y.) | THICK (MILS) | GRAB STRENGTH | PERM (CFM) | |
MACHINE DIRECT | CROSS DIRECT | ||||
SUP70 | 3.5 | .045 | 35 | 38 | 500-600 |
Micro-Flo 600
Micro-Flo 600 is a composite media consisting of meltblown polypropylene supported by scrim layers of spunbond polypropylene for added strength. It is a high efficiency product that is ideal for small particulate removal in applications such as honing and polishing.
Characteristics of Micro-Flo 600:
- High Efficiency
- Not ideal in High Flow Application
- Good Strength Characteristics
- Depth Filtration – High Small Particulate Capture and Holding
BONDING: Laminate
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength | Perm (CFM) ASTM D737-75 | |
MACHINE DIRECT | CROSS DIRECT | |||||
SMBSBPP52 | 2.75 | 25 | – | – | – | 80 |
Holliflo
Hollifo is a composite of polyester staple fiber needled onto a spunbond polypropylene scrim layer. It is ideal in very high flow environments, or systems that are undersized. Its needled construction allows for continued increased efficiency during its life cycle. Holliflo’s construction makes it very forgiving in high tramp oil environments, while the PP scrim assists in tramp oil removal.
Characteristics of Holliflo:
- Polyester Fiber Needled to PP Skrim Support Layer
- Good Strength at Heavier Weights
- Good Flow Characteristics
- Depth Filtration – High Dirt Holding Capacity
FIBER: Polyester/Polypropylene
CONSTRUCTION: Needlepunch
BONDING: Proprietary
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SHF50G | 2.50 | 52 | 35 | 16 | 18 | 595 |
SHF60G | 3.00 | 60 | 40 | 24 | 33 | 527 |
SHF8015 | 4.00 | 62 | 80 | 45 | 40 | 216 |
SHF80C | 4.00 | 70 | 40 | 30 | 35 | 437 |
SHF100F | 5.00 | 81 | 50 | 36 | 60 | 352 |
Cerex®
Cerex is a spunbond nylon product made from continuously extruded resin and can be pointbonded for additional strength. Nylon has very high strength characteristics and good chemical resistance.
Characteristics of Nylon:
- Flatbond, Pointbond
- Excellent Strength
- Good Flow Characteristics
- Good Chemical Resistance
Our Nylon products include the following:
FIBER: Nylon
CONSTRUCTION: Spunbond
BONDING: None
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SB06 | 0.3 | 2.65 | 10 | 8 | 4 | 1401 |
SB08 | 0.4 | 3.00 | 12 | 12 | 6 | 1181 |
SB10 | 0.5 | 3.3 | 16 | 16 | 9 | 1021 |
SB12 | 0.6 | 3.6 | 20 | 20 | 12 | 887 |
SB14 | 0.7 | 3.8 | 23 | 25 | 14 | 813 |
SB17 | 0.85 | 4.4 | 29 | 30 | 18 | 640 |
SB20 | 1.0 | 4.8 | 34 | 36 | 22 | 494 |
SB30 | 1.5 | 6.4 | 52 | 58 | 35 | 253 |
SB40 | 2.0 | 7.9 | 71 | 78 | 48 | 177 |
FIBER: Nylon
CONSTRUCTION: Spunbond
BONDING: Pointbond
FSP # | Weight (O.S.Y.) | Thick (mils) | Mullen Burst (PSI) ASTM D3786 | Tensile Strength (ft/lbs) ASTM D5034 | Perm (CFM) ASTM D737-75 | |
Machine Direct | Cross Direct | |||||
SB06PB | 0.3 | 3.9 | 8 | 6 | 3 | 1350 |
SB10PB | 0.5 | 5.5 | 13 | 13 | 8 | 1000 |
SB14PB | 0.7 | 7.2 | 19 | 20 | 12 | 825 |
SB17PB | 0.85 | 8 | 24 | 25 | 17 | 700 |
SB20PB | 1.0 | 9 | 28 | 31 | 21 | 600 |
SB30PB | 1.5 | 12.2 | 44 | 52 | 36 | 375 |
SB40PB | 2.0 | 14.2 | 61 | 75 | 52 | 275 |
SB60PB | 3.0 | 18.4 | 97 | 122 | 86 | 150 |
SB80PB | 4.0 | 21.8 | 117 | 156 | 118 | 110 |
- Cerex® is a trademark of Cerex
- REEMAY® is a trademark of Berry Global
- Manniweb® is a trademark of Lydall
Get Started with your Non-Woven Filter Fabric & Roll Media Project
If you need custom filtration products using non-woven filter fabric and roll media, look no further than Filtration Systems Products, Inc. We strive to provide service that meets or exceeds your expectations, despite the many options available to you. Contact us today to start your custom project!